| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat Belt | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003H52000X |
| Title: SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 2 Seat): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL REAR NO. 2 SEAT BELT ASSEMBLY 3 POINT TYPE
|
(a) Align the rear No. 2 seat belt claws with the body holes. |
(b) Install the rear No. 2 seat belt assembly with the 5 bolts.
Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)
2. INSTALL ROOF HEADLINING REAR TRIM COVER LH
|
(a) Engage the 4 clips and install the roof headlining trim cover. |
3. INSTALL REAR ROOF NO. 3 AIR DUCT
|
(a) Install the rear roof No. 3 air duct with the 5 clips. |
4. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining assembly
.
|
|